HSK50A-JHM

HSK50A-JHM HYDRAULIC CHUCK – JE-IL SOLUTION

HSK50A-JHM Hydraulic Chuck have special clamping method by removing and expansion the sleeve which were brazed on inside of chuck. This method completely clamping a cutting tool on all around inner bore face of chuck and keep high precision and proper for high speed maching as well.

Advantages of HSK50A-JHM Hydraulic chuck:

1. Fine finishing, High speed & high accuracy machining, Reaming, Drilling, etc.
2. Below 3µm at 3 x D / This high accuracy extend tool life including improving machining condition.
3. Easy Clamping and Un clamping by T-Wrench. It is able to tool change after assembing the chuck into the spindle of Machine.
4. Center through coolant system (AD) + Flange through coolant system (B).
5. Even under high speed, it works very fast without vibration and makes sure of fine process and safety with fine balance up to G2.5/25,000rpm (Max.) = G6.3/60,000rpm.

Note of caution when operating HSK50A-JHM Hydraulic chuck:

• Please fully clamping the clamping screw by T-Wrench (the clamping screw will be stopped, if it was fully clamped by human power)
• Please fully insert a cutting tool into the chuck. At the least, tool shank edge to be arrived at 8mm from end of the inner bore depth.
• Please eliminate a dust or tiny chip or humidity in the tool shank and inner bore face of the chuck.
• Please do not pull out the Clamping Screw and Oil Sealing from the chuck.
• Please do not using hydraulic chuck for rough cutting.
• Please do not disposal it by oneself when come out operating problem such as broken the chuck or clamping & unclamping problem etc.

If you have some problem for the hydraulic chuck, please contact us at first.